The object of this IFB is to provide a standard polo shirt and hat for CALPIA’s Healthcare Facilities Maintenance (HFM) staff to wear. There are currently over 550 HFM staff members located at correctional facilities throughout the state of California. CALPIA is looking for a high quality short-sleeved pullover shirt with collar and 3-button placket and 5- panel hats. Each shirt will be embroidered with HFM logo on the front. The single-colored logo is approximately 4” wide and 2.25” high. See Attachment A for logo design. Please see below for the colors, matched to Pantone TSX (Polyester) utilizing Pantone Connect software: • Red (CALPIA Lettering/CALPIA Outline ) (HEX: B51E3C), (RGB: 181/30/60) • Pantone match: 19-1661 TSX (Vigilance) The heavy-duty 100% snag-proof polyester shirt shall be stain-resistant and able to withstand at least 50 launderings without excessive fading, yellowing, or curling of fabric. Each cap will be embroidered with HFM logo on the front two panels. The singlecolored logo is approximately 3” width x 2” height: See Attachment B for logo design. The Pantone Matching System (PMS) Colors above. 2.0 Specifications Proposed Brand: CornerStone CS411 (Women’s), CS410 (Men’s S-4XL), and CS412 (Men’s 5XL and 6XL) for shirts. Port & Company Five-Panel Twill Cap CP86 for cap. 2.1 Women’s shirts (sizes S-4XL): A. Material: 100% snag-proof polyester, 6-7 ounce weight. CornerStone CS411. B. Color: Single-colored embroidered logo on left breast C. Construction: Double-needle stitching throughout, tag-free label, flat knit collar, three-button placket with dyed-to-match buttons, mic clips at center and shoulders, raglan sleeves, reinforced dual pen pockets on left sleeve, side vents, and drop tail to stay tucked in...