The Surveyor’s Scope of Work includes, but is not limited to, the following: BOUNDARY SURVEY - GENERAL REQUIREMENTS Perform a field survey to locate boundary monuments related to a project site boundary. If an existing Record of Survey, Parcel Map or Final Map exists for the project site, and sufficient record monuments are found, locate and place the record boundary lines in the topographic mapping. Reference monuments used to place boundary lines in the topographic map will also be shown. No missing or destroyed monuments will be replaced. If no Record of Survey, Parcel Map or Final Map exists for the project site, perform a field survey in accordance with Business and Professions Code §§8762. Monuments shall be set at property corners or at alternate locations if corner monuments cannot be set. A supplemental drawing of the boundary and monuments will be provided to the Client for placement in the topographic mapping. The location of easements and rights‐of‐way, both over and in favor of subject properties should be included in this proposal, including costs for obtaining a preliminary title report for the subject property if such report is not readily available from the District. TOPOGRAPHIC SURVEY SCOPE OF SERVICES The scope of services covered by this RFQ is to perform the tasks described in the Topographic Survey, Base Scope of Services. Proposing firms shall retain a qualified underground utility location service to provide thorough data collection and facilitate completion of the work tasks listed below: 1. Note width of adjoining roadways, width and type of pavement. Identify existing landmarks and monuments...
