Specifications include, but are not limited to: Library card with Key Tag: Credit card size, back with barcode, plus one accompanying key tag (fob), back with barcode GRAPHICS (Designs) Zebra Design SPECEFICATIONS Material: maximum durability, flexibility, high temperature exposure, scratch/crack/split resistant, and card life 30 mil Teslin; 30 mil PVC plastic Flat or glossy laminate is acceptable (whichever is most cost effective) Front of card: 4 color Artwork to be provided by library Back of card: 1 color, black Signature surface panel - to accommodate inks from: ball point pen, gel pen and marker such as Sharpie fine line. Barcode (see special specs) bar code start number provided by library Patron statement of responsibility to be provided by library Key Tag: Key tag size is 2-1/8" x 7/8" with a 3/16" hole. The hole shall be away enough from outer edge to allow extensive use without breaking. Barcode Specs: The barcode will be printed in Codabar (Code 2 of 7) format. The barcode will be printed at a high module resolution of 0.0065 in.(0.17mm). The barcode must be at least 1 inch in length at this resolution. If the vendor cannot produce the required module resolution, lower resolution can be permitted if symbol magnification of 25% greater, at a module resolution of 0.0081 in.(0.21mm). The barcode will not have any artwork, text or bounding box that intersects the data or is within 1/4th of an inch to the data portion of the barcode The barcode will be printed in a flat black (non-reflective) ink on a white background. Barcode number to appear as 1 string; no spaces between numbers. Etc.
