1. Display Specifications Pixel Pitch: The LED video wall should have a pixel pitch of approximately 2.6mm to 3.9mm, ensuring high-resolution display suitable for minimum 15’ viewing distances. Brightness: The display must achieve a brightness level of at least 4,000 nits to ensure visibility in outdoor daylight conditions. Contrast Ratio: A minimum contrast ratio of 5,000:1 is required for clear and vibrant image quality. Refresh Rate: The LED wall should support a refresh rate of at least 3,840Hz to ensure smooth video playback without flickering. 2. Size and Configuration Screen Dimensions: The overall size of the LED video wall should be between 20 and 30 feet in width. Aspect Ratio: The system should be designed in as close to a 16:9 format as possible for optimal video display. Maximum Height: The screen must not exceed 13 feet in height when placed on the ground. 3. Mobility and Durability Portability: The LED video wall must be designed for easy transportation and quick setup, featuring lightweight panels and a robust mounting/support system. Storage and Transport: The video wall must be designed for easy assembly at specific events and then broken down for storage. It should be contained in one or more road cases for safe and efficient transportation. IP Rating: The equipment should have a minimum IP65 rating for the front and IP54 for the rear, ensuring protection against dust and water ingress during outdoor use.
