1. Fire/Smoke Alarms • a. Contractor shall install eighty-eight (88) smoke alarms/detectors? b. Alarms shall be hardwired and use existing wiring, where possible. c. Locations, as shown in Maps 1-10: i. Auto Shop: 10 ii. Guitton Hall: 5 iii. Heavy Equipment Shop: 5 iv. Interp Offices: 12 v. Locker/Storage Room: 4 vi. Maintenance Office: 6 vii. Plumbing/Wood/Welding Shops: 17 viii. Ranger Station: 14 ix. Resource Offices: 2 x. Visitor Center and Museum: 13 2. Alarm Panels/Control Box • a. Contractor shall upgrade or replace the six (6) existing panels. b. Panels shall be the most current Bosch panels with both cellular and ethernet networking capabilities. c. Contractor shall supply Bosch RPS programming software and required equipment for remote and direct connection to alarm panels for local programming. d. Panel locations, as shown in Maps 1-10: i. Auto Shop: 1 ii. Guitton Hall: 0 iii. Heavy Equipment Shop: 1 iv. Interp Offices: 0 v. Locker/Storage Room: 1 vi. Maintenance Office: 0 vii. Plumbing/Wood/Welding Shops: 0 viii. Ranger Station: 1 ix. Resource Offices: 1 x. Visitor Center and Museum: 1 3. Motion Sensors • a. Contractor shall upgrade or install fifty (50) motion sensors. b. Motion sensors shall be standard corner motion sensors. c. Motion sensors shall be hardwired and use existing wiring, where possible. d. Motion Sensor locations, as shown in Maps 1-10: i. Auto Shop: 2 ii. Guitton Hall: 4 iii. Heavy Equipment Shop: 3 iv. Interp Offices: 7 v. Locker/Storage Room: 3 vi. Maintenance Office: 6 vii. Plumbing/Wood/Welding Shops: 3 viii. Ranger Station: 8 ix. Resource Offices: 5 x. Visitor Center and Museum: 9
