Specifications include, but are not limited to: ID CARD SYSTEM ID Card system- Where each employee is assigned a picture ID card that can be swiped at one of six entrances to access the building as shown below in Points of Control and on Exhibit A. Install new tamper resistant Card readers and electric lock hardware on the outside of the below Points of Control ID Badges Install ID Card producing scanning equipment and software that the CCC can operate and generate photo ID badges for our employees. ID Badge cards must be made out of durable, cleanable material. Card readers at each entrance indicated on the maps titled Exhibit A and Exhibit B. The ability for CCC to approve/deny or turn off access immediately. Install new electric lock hardware at all entrances of the building that never restricts the ability to freely exit the building at any time and must comply with all building fire codes, new automatic lock/unlock features for individual doors, 24 hours a day/7 days a week security monitoring and 24 hours/7 days a week fire monitoring according to NFPA standards. Network-connected access control panels. The system must include remote access, including by smartphone or internet, allowing CCC system managers to remotely and immediately restrict and permit access to the building.
