LABOR & INSTALLATION Remove Very Heavy Commercial Folding Door From Opening. Remove Commercial Door Opener. Remove Old Call Box. Install New Commercial Service Roll Up Door. (1) Install New Commercial Roll Up Door Operator (1) Right Side, Inside Looking Out. Install New Call Box. (1) Install new photo safety eye. (1) COMMERCIAL DOOR (1) Commercial Roll Up Door. Lawrence Model HDFM-PG Overhead Coiling Service Door. (OR EQUAL) Interior Face Mounted (E-Guides To Steel Jambs - 20ga Gray Painted Galvanized Curtain (Flat Slat) - Double Steel Angle Bottom Bar With Vinyl Weather Strip. - Slide Locks (Omitted On Motor Operated Doors Without Interlocks.) - 3/16" Steel Guides Prime Painted Black - 50,000 Cycle Long Life Springs - 24Ga Gray Painted Galvanized Square Hood (BeadDown) -OR EQUAL TO THESE SPECIFICATIONS COMMERCIAL MOTOR (1) Commercial Motor Operator. Lawrence Model SGH5043 Right Hand Operation. (OR EQUAL) - 1/2HP 460V 3PH - Inline Gear Drive Assembly - Non-Resettable Cycle Counter - Auxiliary Chain Hoist - Three Button (Open, Close, Stop) Surface Mounted Control Station. - Front Of Coil Mounting Bracket -OR EQUAL TO THESE SPECIFICATIONS MISC Safety Photo Eyes (1 set) - Lawrence SRPE Reflective Photo Eye (OR EQUAL) MISC -Call box -3M, model # 78-8028-9195-8 (OR EQUAL) RENTAL EQUIPMENT Two (2) SCISSOR LIFT & One (1) Forklift.
