A) BID ITEM 1: Rochambeau Park - Court Resurfacing 1. Existing asphalt is 3” thick. 2. Mill and apply asphalt overlay to approximately 20,600 sq. ft. of sport courts – one tennis court and two basketball courts (Attachment 2; Figure 1). 3. Transition joints between rehabilitation methods. a. Mill 3” of A.C in areas shown b. Apply crack filler to cracks exposed after milling c. Furnish and compact 3” of hot mix asphalt with 1/2” aggregate in one lift d. Compact edges for linear appearance 4. Asphalt will be allowed to cure for a minimum of 2 weeks prior to application of acrylic playing surface. Apply temporary painted lines and re-open courts to the public during this period. Contractor shall not store material on site while courts are open to the public. 5. Repaint North portion of pavement ~3,200 sq. ft. Coordinate additional playground line striping, layout, and colors with project manager prior to construction (Attachment 2; Figure 2). a. Dashed yellow line on North side of basketball court. b. Yellow and white ‘Flower Petal’ Designs. c. Two sets of hop-scotch lines. d. White dots field. 56 white dots. 24” spacing between dots. e. Four-square paint and linework at SE side of basketball court. i. Dark blue and light blue court acrylic in four-square with white lines. 6. Remove four (4) existing backboards, hoops, and nets. Existing basketball posts to remain. 7. Furnish and install four (4) new backboards, hoops, and nets. a. New backboards to be transparent clear acrylic First Team Sports FTT222 ‘Legend Supreme’ 42” x 72” or approved equal. Contractor is responsible for using compatible adaptor and hardware to connect backboard to existing goal posts. b. New basketball goals to be First Team Sports FTT186 Heavy Duty Flex Goal with nylon net, or approved equal. 8. Tennis line dimensions shall conform to American Sports Builder Association Standards for a 78’ court. (See Attachment 2; Figure 7). 9. Demolish existing volleyball post sleeves. Furnish and install 2 new volleyball post sleeves. 10. Demolish existing one (1)tennis net and two (2) tennis posts. Furnish and install 2 new posts, 1 center tiedown mounts, and 1 new tennis net. All games equipment shall be heavy duty designed for outdoor everyday municipal use, manufactured by L.A. Steelcraft or approved equal. Rep: Park Pacific, Inc. sales@parkpacific.com 888.460.7275 a. Tennis posts (3” square, 3/16” thick steel) with net tightener, top pulley, and ground sleeves: Model #ATA-3W; 2 fixed eyes on Post One; 1 fixed eye, net tightener with removable handle, and top pulley on Post Two. Powder Coated Black. Coordinate with vendor on installation to maintain coating. Post adjacent to gate must be removable. b. Net Model: 40LS. Net body 3.5mm braided polyethylene twine, extra heavy duty 22 lbs. spun polyester headband sewn with 5 rows of Dacron thread. Net supported by 5mm PVC coated aircraft cable. c. Tennis center tie down anchor: Model: NTCA. d. Net tie down strap: Model: CTDS. Heavy duty 2” polyester white web, with nickel plated web sides and 11. Basketball & Tennis Court colors shall match other new SF RPD courts with a blue basketball / tennis court; green out of bounds; white playing lines for tennis and basketball, yellow playing lines for volleyball; and include dashed in-key semi-circle, and 2’ radius inner half basketball court not shown in NCAA dimensions. Sport court surface to be manufactured by Plexipave, DecoTurf, Nova Sport USA, or City approved equal that is approved by the US Tennis Association or American Sports Builders Association (See Attachment 2; Figure 6 & 7 for typical court dimensions). B) BID ITEM 2: Victoria Manalo Draves Park - Court Resurfacing 1. Existing asphalt is 3” thick. 2. Mill and apply asphalt overlay to approximately 7,000 sq. ft. of basketball court (Attachment 2; Figure 3). a. Mill 3” of A.C in areas shown b. Apply crack filler to cracks exposed after milling c. Furnish and compact 3” of hot mix asphalt with 1/2” aggregate in one lift d. Compact edges for linear appearance 3. Asphalt will be allowed to cure for a minimum of 2 weeks prior to application of acrylic playing surface. Apply temporary painted lines and re-open courts to the public during this period. Contractor shall not store material on site while courts are open to the public. 4. Remove two (2) existing backboards, hoops, and nets. Existing basketball posts to remain. 5. Furnish and install two (2) new backboards, hoops, and nets. 6. New backboards to be transparent clear acrylic First Team Sports FTT222 ‘Legend Supreme’ 42” x 72” or approved equal. Contractor is responsible for using compatible adaptor and hardware to connect backboard to existing goal posts. 7. New basketball goals to be First Team Sports FTT186 Heavy Duty Flex Goal with nylon net, or approved equal. 8. Basketball court colors shall match other new SF RPD courts with a blue basketball court, green out of bounds, white playing lines, and include dashed in-key semi-circle, and 2’ radius inner half court not shown in NCAA dimensions. Sport court surface to be manufactured by Plexipave, DecoTurf, Nova Sport USA, or City approved equal that is approved by the US Tennis Association or American Sports Builders Association (See Attachment 2; Figure 6 for typical basketball court dimensions). C) BID ITEM 3: Crocker Amazon Park – Court Resurfacing 1. Existing asphalt is 2.5” thick 2. Mill and apply asphalt overlay to approximately 18,750 sq. ft. of tennis courts (Attachment 2; Figure 4). 3. Transition joints between rehabilitation methods. a. Mill 2.5” of A.C in areas shown b. Apply crack filler to cracks exposed after milling c. Furnish and compact 2.5” of hot mix asphalt with 1/2” aggregate in one lift d. Compact edges for linear appearance 4. Asphalt will be allowed to cure for a minimum of 2 weeks prior to application of acrylic playing surface. Apply temporary painted lines and re-open courts to the public during this period. Contractor shall not store material on site while courts are open to the public. 5. Tennis line dimensions shall conform to American Sports Builder Association Standards for a 78’ court. (See Figure 7). 6. Demolish existing three (3) nets and six (6) posts. Furnish and install 6 new posts, 3 center tiedown mounts, and 3 new nets. All games equipment shall be heavy duty designed for outdoor everyday municipal use, manufactured by L.A. Steelcraft or approved equal. Rep: Park Pacific, Inc. sales@parkpacific.com 888.460.7275 a. Tennis posts (3” square, 3/16” thick steel) with net tightener, top pulley, and ground sleeves: Model #ATA-3W; 2 fixed eyes on Post One; 1 fixed eye, net tightener with removable handle, and top pulley on Post Two. Powder Coated Black. Coordinate with vendor on installation to maintain coating. Post adjacent to gate must be removable. b. Net Model: 40LS. Net body 3.5mm braided polyethylene twine, extra heavy duty 22 lbs. spun polyester headband sewn with 5 rows of Dacron thread. Net supported by 5mm PVC coated aircraft cable. c. Tennis center tie down anchor: Model: NTCA. d. Net tie down strap: Model: CTDS. Heavy duty 2” polyester white web, with nickel plated web sides and 7. Tennis court colors shall match other new SF RPD courts with a blue tennis court, green out of bounds, white playing lines. Sport court surface to be manufactured by Plexipave, DecoTurf, Nova Sport USA, or City approved equal that is approved by the US Tennis Association or American Sports Builders Association (See Attachment 2; Figure 7 for typical tennis court dimensions).
