Specifications include, but are not limited to: Provide a work list of locations, controllers, and doors/readers. Run new wires or replace existing wires as needed. Provide all hardware and system programming for connection of the new access control system to the City network(s). Provide installation, testing, adjustment, and initial programming necessary for all equipment. Provide written documentation and specific instructions for system as installed. Provide training to the City in the operation, adjustment, servicing, and repair of the system. Provide/recommend software and printer for creating keycards if the existing unit used by the City is not compatible. The access credentials will be validated at the Proximity/SmartCard card readers at the access-controlled door locations. In case of emergency, the access-controlled doors should be able to lock down the facility.
