The Contractor shall provide all preventative maintenance, inspection, repair, testing, and certification services for CDCR equipment specified on Exhibit A-1, Equipment List. The Contractor shall repair deficiencies identified by the institution/facility CDCR Contract Liaison or designee for the antenna, headend, modulators, combiners, distribution amplifiers, distribution cable, couplings and connectors and other components. Components may be digital, analog or IP-based devices. Services shall comply with all applicable standards and codes, including but not limited to: National Fire Protection Association (NFPA) 70 – National Electric Code (NEC) American National Standards Institute / Telecommunications Industry Association (ANSI/TIA) -568-C.0 – Generic Telecommunications Cabling for Customer Premises ANSI/TIA-568-C.1 – Commercial Building Telecommunications Cabling Standard TIA-569-B – Commercial Building Standard for Telecommunications Pathways and Spaces TIA-570 – Telecommunications Wiring Standard ANSI/TIA-606-A – Administration Standard for Commercial Telecommunications Infrastructure ANSI-J-STD-607-A – Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications TIA-526-7 – Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant TIA-526-14-A – Optical Power Loss Measurements of Installed Multimode Fiber Cable Plant ANSI/TIA-758-A – Customer-Owned Outside Plant Telecommunications Infrastructure Standard ANSI/TIA-942 – Telecommunications Infrastructure Standard for Data Centers Federal Communications Commission (FCC) Title 47 – Telecommunication Chapter I - Federal Communications Commission Subchapter C - Broadcast Radio Services Part 76 - Multichannel Video and Cable Television Service Subpart K - Technical Standards Society of Cable Television Engineers (SCTE) 40 6.4.1 Radio Frequency (RF) Signal Levels and Adjacent Channel Characteristics
