Specifications include, but are not limited to: A. Board up approximately 25 windows using ¾” plywood and security screws. All windows outside of the secure parking lot (front) are to be boarded up from the inside and outside, windows inside the secure parking lot (rear) are to be boarded up from the outside with security screws. B. Board up approximately 6 exterior doors using ¾” plywood and security screws. Rear entry door to building is to be secured with 2-each keyed alike dead bolt. C. Board up approximately 11 windows in garage doors using ¾” plywood and security screws. All windows outside of the secure parking lot (front) are to be boarded up from the inside and outside, windows in the secure (rear) parking lot are to be boarded up from the outside with security screws. D. Interior communication door to be boarded up, window only, and add dead bolt keyed the same as other dead bolt keys. E. Secure lobby area with 3/4” plywood to eliminate access. F. Secure the perimeter of communication tower and electrical pole against the building with 4’x8’x3/4” plywood to eliminate climbing onto the tower. G. Remove all debris including packing materials from the job site on a daily basis.
