Privacy Booth, per attached specifications 12 64 13, or approved equal • Free standing single occupant booth • Steel construction, minimum 14 GA interior skin, minimum 18 GA exterior skin, with a minimum 5/8-inch plywood between interior and exterior skins and acoustic lining • Bolted down stool, 17-19-inch seat height, no restraint ring, 12-inch diameter seat material to be minimum 14 GA stainless steel • Booth to be provided with Cisco DX80/Desk VESA mount adapter and wall bracket securely attached to wall panel stud or backing of adequate strength to prevent vandalism. CDCR will provide and install Cisco desk video conference device • Color: Pre-finished White or Off White (TBD) • On same wall as videoconference device outlet, booth to be provided with 1/4-inch-thick x 10-inch-high x width of booth steel backing plate installed centerline at 25 inches above finish floor for optional future OFOI desk. Backing plate to be welded to steel framing members. • Recessed LED lighting • All outlets and network per specifications • Full mortise hinges, 14 GA minimum, 304 stainless steel, continuous full height • Minimum 15/32-inch monolithic abrasion-resistant clear nonreflective polycarbonate sheet glazing glass per ASTM C1349 • Dimensions: 1-3/4 inches thick x 3 feet wide x 7 feet high. Door Type: Stile and rail construction. Doors: ANSI/SDI A250.8 Level 3, Physical Performance Level A, Model 3 stile and rail, extra heavy-duty, face sheet minimum 16-gauge cold-rolled steel. Finish: Factory finished powder coated. Outwardswinging with full-height glazing and 12-inch-high bottom rail.
