Six (6) Fiberglass Camper Shells The camper shell shall be an ARE V or equal polyester resin fiberglass laminate truck bed cap that cleanly contours to the truck body lines as follows: Positive sealing shall mitigate intrusion of dust, dirt, and debris to the maximum extent possible Solid panel front wall shall be provided, glass is not acceptable. Driver and Passenger side metal frame with painted aluminum insert and folding T-handle lift up doors. Driver and Passenger side Tool Box – No Shelves Solid panel sides shall be provided, glass is not acceptable. Top hinged rear hatchback style door shall be provided with fiberglass panel and gas support struts, glass rear door shall not be acceptable. Door shall be secured by locking single T-handle with three point positive latch system. Commercial grade, all weather compatible headliner shall be provided throughout. LED interior rope or light strip shall be provided, center of the camper shell. Single manual switch shall be provided for activation of the lights. Automotive quality paint finish shall exactly match the vehicle specified. A paint spray out shall be provided for approval before the camper shells are painted. (No Exceptions) Six (6) Slide-out Trays The slide-out tray shall be a Decked, aka Cargoglide or equal. The tray shall be constructed as follows: Power coated steel frame, min 0.75 in Marine grade plywood deck, min Aluminum sidewalls, 4” min 14 double roller bearings mid frame, min 12 side thrust bearings mid frame, min The slide-out tray shall meet the following minimum specifications: Payload: 1,500 lbs, min Extension: 100%, min The following accessories shall be provided with the slide-out tray: Cargo High Sides – 7 in min
