1. BASE VEHICLE 1.1 One (1) 2025 or newer Ford E-350 Cutaway DRW, 158” wheelbase. 1.2 7.3L V8 Premium-Rated engine. (99N). 1.3 Electronic Six-Speed AOD Transmission w/Tow-Haul. (44P). 1.4 High-Series Exterior upgrade package. (18A) 1.5 Power Equipment Group. (903) 1.6 Rear View Camera Kit. (43E) 1.7 User defined switches. (52S) 1.8 Cruise Control. (525) 1.9 B-Pillar Trim Kit. (92B) 1.10 Manual Telescoping Mirrors. (54E) 1.11 Running Boards – LH/RH Door Length. (688) 1.12 Oxford White Clearcoat exterior (YZ), Medium Flint Cloth (CE) 1.13 Ford Protect ExtraCARE extended service plan, 8 year/125,000 miles, $100 deductible. 2. OUTFITTING EQUIPMENT 2.1 Contractor shall provide and install: 2.1.1 Knapheide KUV153DH High Roof KUV Body or County approved equivalent. 2.1.2 5 lb. fire extinguisher, ABC type, mounted in a bracket attached to the cab floor. Consult with County staff for exact location prior to mounting. 2.1.3 LED warning strobe lights. ECCO model ED3777A or equal. 2.1.3.1 Six (6) total. 2.1.3.2 Two mounted to front of cab wind deflector. 2.1.3.3 Two mounted within top six inches at rear of box. 2.1.3.4 One each side of the box. Mounted mid front to rear and within top six inches. 2.1.3.5 Consult with County staff for exact location prior to mounting. 2.1.4 Electric backup alarm, 82-102 db(A) self-adjusting based on background noise. ECCO model SA950 or equal. Alarm shall be mounted at the rear of the vehicle. The alarm shall point to the rear of the vehicle, and the alarm’s horn shall be clearly visible when standing behind the vehicle to ensure the self-adjusting system can function properly. 2.1.5 Install fuel inlet antenna (FIA) part # 596017 or county approved equal. 2.1.6 Antenna must be compatible with Assetworks ME79. 2.1.7 Antenna must be securely attached, within two inches of the filler, in a way that does not inhibit fuel station filling nozzles or the vehicle’s fuel inlet port. 2.1.8 FIA wiring shall extend to the DLC and have an additional two feet of wiring to allow installation of the Assetworks module. 2.1.9 Wiring between DLC and FIA shall be no less than 18 AWG, shielded, with stranded bare copper conductor. If necessary, the cable may be extended. Use shielded cable type Olympic part # 2886 or equivalent, polypropylene insulated, twisted pair, aluminum Mylar shield, 18 AWG stranded tinned copper drain wire, chrome vinyl jacket. Temperature rating: -20ºC to 60ºC. 2.1.10 Connections of electrical wires shall be soldered and sealed using weather resistant heat shrink tubing as per manufacturer’s specifications.
