1. BASE VEHICLE 1.1. One (1) 2024 or Newer/Unused Ford F600 XL 1.2. Oxford White 1.3. DRW 1.4. Vinyl Seats 1.5. 193” WB 1.6. Standard Cab 1.7. 4X4 1.8. Automatic Transmission 1.9. 6.7 diesel 1.10. 245/70R19.5G Tires 1.11.Rapid Heat Supplemental Heater 1.12. Engine Block Heater 1.13.Rear View Camera & Prep Kit 1.14. XL Chrome Package 1.15. Meets all CA Compliances 2. OUTFITTING (FINAL INSTALL LOCATIONS TO BE PLANNED WITH VENDOR AND DEPARTMENT COORDINATOR) 2.1. One (1)13 foot aluminum mechanics body. Stellar TMAX1-13 or equivalent. 2.1.1. Cabinet #1 driver side 2.1.1.1. One (1)Drawer set. Approximately 35’Hx34W’x18D’ 2.1.1.2. Three (3) Shelfs with Three (3) dividers. Approximately 17”x19” 2.1.1.3. One (1)Light bar installed inside of cabinet 2.1.2. Cabinet #2 driver side 2.1.2.1. Three (3) Shelfs with Three (3) dividers. Approximately 23”W x 19”D 2.1.3. Cabinet # 3 driver side 2.1.3.1. One (1) Drawer set. Approximately 11’Hx48W’x18D’ 2.1.3.2. One (1) Light bar installed inside of cabinet 2.1.4. Cabinet # 4 driver side 2.1.4.1. Three (3) Shelfs with Three (3) dividers. Approximately 24”W x 19”D 2.1.5. Cabinet # 1 passenger side 2.1.5.1. One (1) 2 bottle oxy-accent holder 2.1.6. Cabinet # 2 passenger side 2.1.6.1. Three (3) Shelfs with Three (3) dividers. Approximately 20”W x 19”D 2.1.7. Cabinet #3 passenger side 2.1.7.1. Three (3) Shelfs with Three (3) dividers. Approximately 19”W x 19” D 2.1.8. Cabinet # 4 passenger side 2.1.8.1. One (1) Shelf with three (3) dividers. Approximately 53”W x 19”D 2.1.9. Cabinet # 5 passenger side 2.1.9.1. One (1) ½” x 50 ‘ hose reel, exiting out of rear of truck body. 2.2. One (1)8,660-lb capacity crane with 30 foot of reach. Stellar 8630 or equivalent. Installed on passenger side rear of mechanics body 2.3. One (1) crane remote. Stellar CDT or equivalent 2.4. One (1) 40 HP hydraulic driven air compressor. Output of 40 CFM @ 100 PSI. Installed on top driver side of mechanics body. 2.5. One (1) 30 gallon air tank 2.6. One (1) 20 gallon Hydraulic reservoir, bulkhead mounted
