Specifications include, but are not limited to: 1.General: Industrial or Utility Type Wheel Tractor with liquid cooled diesel engine, mechanical front wheel drive axle, independent Power-Take-Off, swinging drawbar, hydraulic lift system and three-point hitch. The wheel tractor this specification is intended to cover will be used in highway maintenance mowing applications which include side slope or hillside operations and must be suitable for such use. 2.PTO Power: Manufacturer’s advertised PTO power of no less than 85 horsepower at rated RPM. 3.Engine: Liquid cooled diesel equipped with 12 volt electrical system including battery, starter and alternator. Shall have oil and fuel filters with replaceable elements and approved dry type air cleaner. Shall have vertical exhaust muffler with rain cap or curved exhaust pipe. Engine cooling system shall have anti-freeze protection to -20o F, or lower. All other equipment necessary for efficient operation shall be furnished. 4.Instruments: Shall be equipped with ammeter or charge indicator light, tachometer, electric hour meter (showing actual engine run time independent of engine RPM) and all necessary gauges, including temperature gauge, oil pressure gauge or warning light, and fuel gauge.