Specifications include, but are not limited to: 1.The GNSS Receivers must meet the following minimum specifications: a.240 GNSS channels b.GPS L1C/A, L1P(Y), L2P(Y), L2C c.GLONASS L1C/A, L2C/A, L3 d.BeiDou B1 (phase 2), B2 e.Galileo E1, E5b f.QZSS L1C/A, L2C, L1SAIF g.SBAS L1C/A h.L‐band i.Support for Trimble RTXTM real‐time correction services (subscription not included) j.Patented Z‐Blade technology for optimal GNSS performance k.Full utilization of signals from all 6 GNSS systems (GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS) l.Enhanced GNSS‐centric algorithm: fully‐independent GNSS signal tracking and optimal data processing, including GPS‐only, GLONASS‐only or BeiDou‐only solution (autonomous to full RTK) m.Fast Search engine for quick acquisition and re‐acquisition of GNSS signals n.Patented SBAS ranging for using SBAS code & carrier observations and orbits in RTK processing o.Patented Strobe™ Correlator for reduced GNSS multi‐path p.Up to 10 Hz real‐time raw data (code & carrier and position output) q.Supported data formats: ATOM, CMR, CMR+, RTCM 2.1, 2.3, 3.0, 3.1 and 3.2 (including MSM), CMRx and sCMRx (rover only) 2.Real‐Time accuracy (RMS) a.Real‐Time Kinematic position (RTK) b.Horizontal: 8 mm + 1 ppm c.Vertical: 15 mm + 1 ppm.