Specifications include, but are not limited to: 1. Sampling Station with removable plastic enclosure Shall be 3’ bury, with a ¾” FIP Inlet, and 7/16” unthreaded blow off and sampling bibb. Station shall be enclosed in a lockable, removable 7” round UV rated enclosure. When open the station shall require no key for operation, and all water flow shall pass through an all stainless steel waterway. All working parts shall be of stainless steel and serviceable from above ground with no digging or replacement needed. A stainless steel petcock will be located below the sampling bibb to allow pumping of any water remaining inside the station to insure non-freezing. 2. Sampling Station w/non-removable aluminum box: Shall be 3’ bury, with ¾” FIP inlet, and 7/16” unthreaded blow off and sampling bibb. Station shall be enclosed in a lockable, non-removable 6” square UV Aluminum box with hinged openings. When open, that station shall require no key for operation, and all water flow shall pass through all stainless steel waterway. All working parts shall be of stainless steel and serviceable from above ground with no digging or replacement needed. A stainless steel petcock will be located below the sampling bibb to allow pumping of any water remaining inside the station to insure non-freezing.