Specifications include, but are not limited to: 4.1.1 Remove existing wall in lobby that backs up to the bathroom (approximately 10'4" long). Remove existing wall, bricks and tile as well as the platform bricks and tile in front of wall - leaving only the brick column on the right side of the existing wall. 4.1.2 Remove the two pendant ceiling lights and install wire nuts on wires. Pendant lights will not be reinstalled. (Pendant lights remain with the owner.) 4.1 .3 Build new wall out approximately 29" from old existing wall using 2 X 4 studs 16"o.c. from floor to lobby ceiling. The end wall at the remaining brick column will be same width as brick column. The inside width and length of the new ADA restroom must have a minimum clearance of 7'6" from wall to wall.