Specifications include, but are not limited to: Chemical Properties Magnesium Chloride Concentration 26 to 30% Total Phosphates*, “Standard Methods for the 25 ppm max. examination of Water and Waste Water,” APHA-AWWA-WPCF. Cyanide 0.20 ppm max. Chromium 0.5 ppm max. Cadmium 0.15 ppm max. Calcium 100 ppm max. Sulfate 0.5 % max. *Except a 1% solution will be used. To prepare a 1% solution place 10 ml of sample into 500 ml distilled or DI water contained in a 1 L volumetric flask to which 2.5 ml 1 + 1 sulfuric acid has been added. Swirl the contents and make up to 1000 ml with distilled water. Physical Properties pH, ASTM E 70-90* 6-9 Specific Gravity 1.24-1.30 Corrosive Property, Test Method AHTD TM910 65% less corrosive than NaCl Settleable Solids and Solidification, No accumulation Test Method ARDOT TM911 *Except a dilution must be made of 1 part deicer to 4 parts distilled/deionized water before reading. The material supplied shall have no constituents which would cause residual waste to meet the definition of a hazardous waste, as found in 40 CFR 261.