1. Prospective contractor shall furnish all Labor, Tools, Equipment and Materials to install new 6” seamless gutters with Gutter Helmet system https://www.gutterhelmet.com/ or equivalent (Approx. 105 lin. Ft.) and 3”x4” downspouts (Approx. 3 ea. in front and 2 ea. in back). 2. Contractor shall configure all downspouts with elbows so that the downspouts can be strapped to the house. 3. Contractor shall install concrete splash blocks at all downspouts to divert water away from house . Gutters color to be chosen by Park. 4. Prospective contractor shall perform the removal of existing Shingles and Felt. And the removal of all debris from project site. And to cordon off work areas where guest could possibly get injured. 5. Prospective contractor shall furnish materials, tools and labor, equipment to install new drip edge and StormTread synthetic roofing underlayment or equivalent and (class 3 impact) 60-mph wind architectural shingles on roof Approx.(2,032 sq. ft. ) of roof area. And Approx.(201’ lin. Ft. drip edge) and Approx. (20’ lin. Ft. step & kick-out flashing.) and Approx. (52’ lin. Ft. vent ridge). 6. Prospective contractor shall remove and replace, approx. 20' of siding on stepped roofs to expose flashing and replace with new flashing and reinstall siding (replace and repaint if damaged.) 7. Prospective contractor shall cut back decking and underlayment (approx.. 2” from center line of ridge for ventilation and to install new vent ridge. 8. The color of shingles shall best match existing and other roofs if close to the one that’s being replaced (Weatherwood). 9. Prospective contractor shall install a premium starter strip around the eaves and rakes to help prevent wind uplift. 10. Prospective contractor shall nail the shingles with a minimum one inch in length and a minimum four nails per shingle.
