Cabin 9,10 Duplex 1. Prospective contractor shall perform the removal of existing Shingles and Felt. And the removal of all debris from project site. 2. Prospective contractors shall be responsible for all safety barriers like orange construction fence to keep bystanders out of work areas and at a safe distance equivalent. 3. Prospective contractor shall be responsible for any permits that may be required. 4. Prospective contractors shall furnish all materials, tools and labor, equipment to install new drip edge and StormTread synthetic roofing underlayment or equivalent and a (class 3 impact) 60-mph wind architectural shingles Approx. (2’780 sq. ft. ) of roof area. And Approx. (284’ lin. Ft. drip edge) and Approx. (68’ lin. Ft. vent ridge) 5. Prospective contractor shall cut back decking and underlayment (approx. 2" from center line of ridge for ventilation and install new vent ridge. 6. The color of shingles shall best match existing (Weatherwood) and other roofs if close to the one that’s being replaced. 7. Prospective contractor shall install a premium starter strip around the eaves and rakes to help prevent wind uplift. 8. Prospective contractor shall nail the shingles with a minimum one inch in length and a minimum four nails per shingle.
