This item shall consist of furnishing and placing pavement markings, including words, arrows, and emblems, of the color, type and material specified, in accordance with these specifications and to the dimensions and at the locations shown on the plans or as directed. The markings are to be placed under existing traffic conditions. The work shall meet the requirements of the MUTCD except as modified by these specifications. Materials. (a) Paint. Paint shall be a ready mixed white and yellow paint suitable for application on concrete and bituminous pavements. All paints used for this application shall be listed on the ARDOT Qualified Products List (QPL). The manufacturer shall furnish a certification for each lot certifying that the materials supplied conform to all the requirements specified and stating that the material is formulated the same as the material tested for QPL listing. (b) Thermoplastic Material. Thermoplastic material used shall meet all requirements of Section 719.02 of the ARDOT Standard Specifications. (c) Pavement Marking Tape. Pavement marking tape shall be a preformed tape conforming to Section 720.02 of the ARDOT Standard Specifications for Type 5. (d) Methyl Methacrylate (MMA) shall be a standard color chosen by the City, include glass beads, and meet manufacturer’s standard specifications. MMA should not be applied to surfaces below 40°F or above 100°F.
