Specifications include, but are not limited to: Basic Machine: • Manufactured in the United States; • Shall be all wheel drive, with 14ft. mold board with standard 5/8 hardware.; • 17.5-25 radial tires on 3 pc wheels.; • Enclosed cab with climate control, all wipers, proper ventilation for defrosting windows.; • High back cloth upholstered air ride seat with armrest.; • Rear ripper / scarifier with 3 ripper shanks and 9 scarifier shanks and a push block counter weight in the front machine.; • Equipped with dual beam lights for driving on the road. Brake lights, turn signals and hazard light, will have all lighting for night work.; • Heated right and left rearview mirrors.; • Lower front wipers.; Engine: • Must meet EPA standards. Must have dual radial seal dry air cleaner.; • Shall have wet-sleeve cylinder liner design.; • Shall be a turbo charged 6-cylinder diesel engine built by manufacturer of the machine.; • Shall have no less than 270 horsepower.; • Shall be equipped with a power management system for variable horsepower.; • Shall be equipped with electronic over speed protection.; • Shall be equipped with a curved stack to minimize water entry into exhaust.; • Shall be equipped with a system to prevent engine stall.; • Shall be equipped with throttle control.; • Shall be controlled by a switch to allow to increase, decrease and resume located on the right-hand console.; • D.P.F shall be self-cleaning on the fly with indicator light on monitor to inform operator of its status.; • Shall be rubber mounted to reduce noise and vibration.
