Specifications include, but are not limited to: ROLL-OFF CONTAINERS, 30 YD RECTANGULAR OPEN TOP - ASC. FLOOR: A. Shall be ¼” floor plate with no more than 5 pieces; preferably 2. _____________ B. Shall be 3” structural channel on 16” centerlines. _____________ C. Rails shall be one piece, 2” x 6” x 3/16” structural tube, all prime material no splits _____________ or joints. D. Solid steel bull-nose inserted into tube rail for added strength, not just butt-welded on outside of tube. Bull-nose is double tapered for easier loading, and has a socket for roller shaft to assure integrity of roller system. E. Gussets on every other cross member shall be 3/16” plate. F. Rear wheels shall be 8” diameter x 10” long, heavy-duty construction _____________ G. Nose rollers shall be 4” diameter x 6” long. _____________ H. Hook shall be 1-1/4” hi-tensile steel, inserted through 1” hook plate, locked in, and _____________ full welded both sides. Hook and hook plate carry a life-time guarantee. A. Shall be ten (10) gauge plate. B. Structural side tubes shall be ten (10) gauge steel, four (4) way bend, 3” deep x 6” _____________ wide, tubes on 24” centerlines. Welding shall be 3” high weld at floor – all additional welds shall be approximately 3” long each. Bottom of side tubes shall have drain hole. A ladder shall be on driver’s side of container. C. Bottom of side plate and bottom of formed tubes are full welded to floor plate on outside. D. Top tubes to be 3 x 4 x 3/16”. One piece per side and bulkhead. No splits or joints.