Specifications include, but are not limited to: GENERAL • All materials shall meet MUTCD and ADOT requirements • All channelizing devices shall come with sheeting applied • All sheeting dimensions shall meet MUTCD Figure 6F-7 requirements VERTICAL PANELS Vertical Panels shall meet the following requirements: • 8” x 24” High Intensity Prismatic sheeting • 20-pound base • Left/Right striping • Gemstone by Plasticade or equal • Marked with COT-DTM identifier TYPE II BARRICADES Type II Barricades shall meet the following requirements: • 14 Gauge galvanized steel frame/legs • 8-Inch extruded, waffle, or fluted plastic panels • Panels shall be double walled • 24” width • High Intensity Prismatic sheeting • Left/Right striping • Combocade by Plasticade or equal • Delivered fully assembled • Marked with COT-DTM identifier TYPE III BARRICADES Type III Barricades shall meet the following requirements: • 48” x 8” Plastic Panels • Panels shall be double walled • 1-Sided, Orange/White • 6" Stripe Left/Right • High Intensity Prismatic sheeting • 1.75" X 5.5' Square Uprights • Welded 2" Square, 14-gauge base • Plasticade or equal • Marked with COT-DTM identifier TRAFFIC CONES Traffic Cones shall meet the following requirements: • 28” Height • 7lbs • Wide Body • One Piece Molded Orange PVC • 2-Reflective Collars • High Intensity Prismatic sheeting • Marked with COT-DTM identifier