Specifications include, but are not limited to: It is the intent of the City of Glendale to establish a term contract for the purchase of water meters and replacement parts on an “as required” basis. Meters should be compatible with Itron meter reading software. 1.3.1 Meter sizes shall be 5/8” x 3/4", 3/4”, 1”, 1-1/2", and 2”. 1.3.2 Meter types shall be positive displacement magnetic drive, oscillating piston, nutating disc, or ultra-sonic that conform to the appropriate latest revision of the AWWA Standard C-17, C-700, C-800, NSF/ANSI Standard 61 Annex F & G and Federal law except as herein amended. 1.3.2.1 Mechanical Meters shall have a permanently and hermetically “roll sealed” register. Register lid, register box and main case shall be of lead-free alloy composition. Meter main case shall be made of lead-free alloy composition. The compartment that holds the register (register box) and lid shall also be made of lead-free alloy. 5/8” x 3/4", 3/4”, and 1” meters shall have a lead-free alloy bottom plate design with stainless steel bolts enabling access to the measuring chamber after the bottom plate has been removed. Meters shall have cast on them in raised characters the size, model, NSF 61, and direction of flow. The manufacturer’s serial number shall also be imprinted on the outer case of all meters. 1.3.2.2 Ultrasonic Meters main cases shall provide full compliance with Section 4.1 (Materials) of the most recent version of ANSI/AWWA C715-18 Standards for Electromagnetic and Ultrasonic Cold-Water Meters.
