The contractor shall provide the following Elkhart brand equipment meeting exact manufacturer specifications: 2.4.1 XD Shutoffs with Pistol Grip - 1.5" Configuration w/ Custom Etching: 2.4.1.1 Part Number 0033XDOF-020101090A: XD Shutoff with pistol grip, black grip insert, 1.5" FNH inlet, 1.5" MNH outlet, white bale insert 2.4.1.2 Part Number 0033XDOF-020101030A: XD Shutoff with pistol grip, 1.5" FNH inlet, black grip insert, 1.5" MNH outlet, yellow bale insert 2.4.1.3 Part Number 0033XDOF-020101110A: XD Shutoff with pistol grip, 1.5" FNH inlet, black grip insert, 1.5" MNH outlet, tan bale insert 2.4.1.4 Part Number 0033XDOF-020101020A: XD Shutoff with pistol grip, 1.5" FNH inlet, black grip insert, 1.5" MNH outlet, red bale insert 2.4.2 XD Shutoffs without Pistol Grip - 2.5" to 1.5" Configuration w/ Custom Etching: 2.4.2.1 Part Number 0069XDOF-010100050A: XD Shutoff without pistol grip, 1 3/8" waterway, 2.5" FNH inlet x 1.5" MNH outlet, orange bale insert 2.4.2.2 Part Number 0069XDOF-010100060A: XD Shutoff without pistol grip, 1 3/8" waterway, 2.5" FNH inlet x 1.5" MNH outlet, green bale insert 2.4.3 Smooth Bore Tips and Accessories: 2.4.3.1 Part Number 000187XD-0502: XD smooth bore short barrel, 1.5" FNH inlet, 1-1/8" bore outlet, orange bumper 2.4.3.2 Part Number 000187XD-0610: XD smooth bore short barrel tip, 1.5" FNH inlet, 1 3/16" bore outlet, green bumper 2.4.3.3 Part Number 04XD017F-0101070A: Chief XD tip with luminescent bumper PRODUCT REQUIREMENTS All equipment must meet the following requirements: 2.5.1 Manufacturing Standards: 2.5.1.1 Factory new condition with current date codes 2.5.1.2 Original Equipment Manufacturer (OEM) parts and components 2.5.1.3 Full manufacturer warranty coverage 2.5.1.4 Compliance with NFPA 1964 standards for fire hose nozzles and shutoffs 2.5.1.5 UL listing where applicable 2.5.2 Material and Construction: 2.5.2.1 Hardcoat anodized aluminum construction for durability and corrosion resistance 2.5.2.2 Stainless steel ball and seat assemblies 2.5.2.3 High-visibility color coding for operational identification 2.5.2.4 Impact-resistant thermoplastic bumpers where specified 2.5.2.5 Chrome-plated brass fittings meeting NST thread standards 2.5.3 Performance Specifications: 2.5.3.1 Operating pressure rating minimum 200 PSI 2.5.3.2 Flow rates consistent with manufacturer specifications for each model 2.5.3.3 Full-flow ball valve design for minimal friction loss 2.5.3.4 Quarter-turn operation for rapid deployment 2.5.3.5 Maintenance-free operation under normal use conditions 2.5.4 Laser Etching Specifications: 2.5.4.1 Laser etching shall be “MESA FIRE “ done in block letters at no additional cost.
