Specifications include, but are not limited to: 5.1.1 Point-to-Point (P2P) Network - Generate P2P Bluetooth traffic using a smart phone/tablet and a remote speaker 5.1.1.1 The P2P network must be designed to operate 24 hours a day for 365 days a year 5.1.1.2 The P2P network must be connected to a 110v power source 5.1.1.3 The smart phone/tablet must have WiFi & Bluetooth capability to allow it to access the Internet and stream audio to the remote speaker simultaneously 5.1.2 Broadcast Network - Generate Bluetooth broadcast traffic using a customizable Bluetooth beacon 5.1.2.1 The beacon must provide a minimum of 50m range 5.1.2.2 The beacon must provide 48 months or more of Battery power or can be hardwired to a 110v power source 5.1.2.3 The beacon must have an advertisement rate of at least one advertisement per second or faster. 5.1.3 Mesh Network - Generate mesh Bluetooth traffic using a 10-node Industrial IoT mesh network. 5.1.3.1 The mesh network must use the Modbus network protocol over Bluetooth 5.0 or newer (e.g. BLE 5.1) 5.1.3.1.1 Each node must contain the following at a minimum: 5.1.3.1.1.1 Three or more sensors (e.g. light, temp, vibration, position, motion, bar code reader, etc.) 5.1.3.1.1.2 One or more actuators (e.g. servo motor, linear actuators, etc.) 5.1.3.1.1.2.1 Node actuators should be as quiet as possible to avoid creating undue noise