The Consultant shall perform a field survey and produce a Results of Survey Drawing which will be utilized in the development of the Right of Way Plans. Depending on project specific instructions outlined in the project scope, the Survey will conform to any/all applicable portions of the "ADOT Right of Way Survey & R/W Plans Preparation Process" document dated August 2007, accepted by the Arizona State Board of Technical Registration and adopted by the ADOT Right of Way Plans Section. Initially it shall be the decision of the ADOT Right of Way Plans Section as to which corners of the Public Lands Survey are needed in connection with the Project. After the Consultant has searched for and/or recovered the designated corners, the Consultant may recommend additional corners that may be needed. The field survey shall consist of the location of designated Section Corners, Quarter Corners including the Center Quarter Corner, and other monuments set by the Survey of the Public Lands. Obliterated corners shall be identified. Pending ADOT approval they may be re-established, and re-monumented. Corners deemed to be "lost" shall be identified. Pending ADOT approval they may be re-established, and re-monumented.
