Specifications include, but are not limited to: 1. The floor of the fire container will be 6’-0” (W) X 6’-0” (L). 2. The 3 sides of the fire container will be 6’-0” (W), 6’-0” (L), X 4’-0” (H) each. At the bottom of each wall, insert two (2) 4” (H) X 8” (L) closable air vents with expanded metal covering on the inside. 3. The front side will also be 6’-0” (W), 6’-0” (L), X 4’-0” (H), however will have two (2) 1’-6” (W) X 3’-0” (H) Doors with hinges to open outwards. The inside of the door frame will have a metal lip to assure complete closure of the doors. Include latching hardware for doors to remain shut. The bottom of the doors should be flush with the bottom portion of the metal floor to allow ease in moving fire charcoals and rocks (no lip). 4. The top of the square walls should be an angled roof type with an 8” (Round) X 18” (H) smoke pipe with a spark arrestor type wire mesh fabric and a cover to deflect rain and debris. 5. All metal should be 3/16” thick. 6. All exterior metal parts will be spray painted with heat resistant black paint.
