Specifications include, but are not limited to: Laminate – Console Tops and Side Surfaces 3.1.5.1. Keyboard, Monitor and fixed height surfaces must be non-glare, 3-D Laminate with no seam between the laminate and the bumper edge. 3.1.5.2. Edge shall be continuous from top through to the bottom of the surface. 3.1.5.3. Front edge shall be a chamfer style edge. 3.1.5.4. No seams between laminate and edge will be acceptable. 3.1.5.5. No edge banding or T-Mold edging will be acceptable. 3.1.5.6. Laminate surfaces to be fully balanced construction with Greenguard certified laminate on top surface and Greenguard certified backer sheet on bottom. 3.1.5.7. Backer sheet on the bottom of the surface must be a light color to improve visibility for technicians. 3.1.6. Laminate – CPU Cabinets, Drawer Pedestals and other casework 3.1.6.1. Casework shall be Laminate to be Thermofused Melamine (TFM) in standard colors, 3/4" thickness finished both sides or approved equal. Doors shall be 3-D Laminate with continuous face through edge material. Material must be thicker than ½”. 3.1.6.2. Cut edges, where exposed, shall be covered with edgebanding, T-mold or sprayed sealant to encapsulate particle board core and limit formaldehyde emissions.