Specifications include, but are not limited to: 1.Pre-washed panel with commercial quality wax, grease, and silicone remover.2.Sand entire panel using abrasive paper as required by paint manufacturer’s specifications.3.Apply a commercial quality automotive sanding primer to the entire panel.4.Sand entire panel as necessary to ensure a smooth, uniform finish for final painting, leaving noscratches or blemishes, which would be visible after final painting. Sanding shall be performedwith abrasive paper as required by paint manufacturer specifications.5.For vehicles which are finished with metallic paint, Contractor shall apply a commercial qualityautomotive non-sanding sealer to the entire panel, after all sanding is completed.6.Newplasticpanels are to be washed with an OEM solvent to ensure proper paint adhesionoccurs.