Specifications include, but are not limited to: If the Airport Maintenance Sand or the Highway Maintenance Sand is in non-conformance with the ¼ inch (airport) or the 3/8 inch (highway) specifications, this can be cause for rejection of the entire shipment. If the Airport Maintenance Sand or the Highway Maintenance Sand is out of specification on either the #16 or the #200 sieve, the total contract price will be reduced by two percent (2%) for every one percent (1%) the material is out of specification on each sieve. For every one percent (1%) the moisture content of the sand is above the specification limit of five percent (5%), the total contact price will be reduced by two percent (2%). This contract price reduction will be separate and in addition to any contract price reduction resulting from the gradation being out of specification. If quality control test results per specifications are not provided in full compliance with the terms of this contract, a five percent (5%) price reduction will be levied on the total contract price. The Department will sample the material upon delivery before contamination takes place and test for conformance to the grading and moisture content requirements. Acceptance sampling and testing will meet the frequency of one test per 5,000 cubic yards.