Specifications include, but are not limited to: furnishing all labor, material, equipment and supervision to properly provide asphalt paving services at various ASD locations on an “As Required” basis for the Anchorage School District. The tasks required to do this work include, but are not limited to thefollowing: 1. Secure and pay for all permits and fees required to begin and complete the project. 2. Remove and dispose of existing asphalt. 3. Re-grade and compact sub base. 4. Pave using 2” D-1 base course and 2” asphalt, Class E in accordance with MOA standards. 5. Furnish and install concrete curb. 6. Remove and dispose of concrete curb. 7. Furnish and install concrete walkways. 8. Remove and dispose of concrete walkways. 9. Surface Overlay, Tack Coat. 10. Clearing and Grubbing and disposal of Materials for Surface Preparation. 11. Grass/Turf area disturbed outside of new asphalt or concrete to be repaired to existing condition. 12. Crack seal material to be Seal Master TruFlex rubberized crack sealant or approved equal. 13. Crack Sealant to be hot-applied only. Cold-Apply sealant will not be accepted. 14. Cracks shall be cleaned prior to sealant with a minimum 100 PSI High Pressure Air Compressor. 15. Additional related work not covered in this scope may be authorized. Work covered by this contract applies only to asphalt work on existing ASD property.