Specifications include, but are not limited to: CHASSIS: GVWR: Not less than 77,200 lbs. Conventional cab, 6X4 series. Steel channel frame with yield strength of 120,000 PSI minimum and combined section modules of 29.42 and an RBM of 3,530,400 in.-lbs. minimum. Single tow pin in front bumper or two frame mounted front tow hooks and two (2) frame mounted rear tow hooks. Front bumper, swept back steel channel. All frame construction, must use huck bolts. 297” frame length must be provided for mounting necessary equipment (i.e. deicer and flusher). Frame cut after mounting of equipment to be held to truck manufacturer's recommended standards. ENGINE: Type – diesel engine, with an approximate Society of Automotive Engineers (SAE) net horsepower of 345, at 1500 RPM, with 1280 lb.-ft. torque at 1,100 RPM minimum and meet current emissions. Engine preheater shall be included. Front Engine Power Take off (FEPTO) mount for 1350 series Spicer (or approved equal) shaft and joint extending forward of radiator, with mount for pump fully installed on truck.
