Specifications include, but are not limited to: Snow Clearing/Ice Ripping is defined as the removal of snow/ice from designated areas using motor graders, snow blowers, front loaders, or by other means as designated by the Administrator. Snow clearing is further defined as removal of all such snow accumulation to within two (2) inches of the road surface. Contractor shall have a Grader, at least 32,000 pounds GVWR, have a minimum 150 horsepower engine, and have a minimum wheel drive of 6x4. Additionally, equipment shall meet all State of Alaska, Division of Motor Vehicles requirements. At the discretion of the Administrator, 3/4-inch serrated cutting edges shall be used and shall be paid at an additional 7% of the bid rate. No additional charge may be included for mounting or dismounting any additional equipment whether or not prescribed. (ITEM No. 1) Additionally, Contractor shall have an AWD Pickup Truck, 3/4-ton, with Laborer/Traffic Control Laborer, with minimum 8-foot 5 way "V" plow (no castors, wheels, or skis allowed) for winter services. Standard four studded snow tires and four tire chains, tow chain/cable/strap, beacon, reflectors/flares. Safety gear and trade tools standard, to include but not be limited to: safety vests, hard hats, gloves, boots, rakes, shovels, hand tools, & beacon standard.
