Specifications include, but are not limited to: Lobby, Conference Room, Common Areas, and General Office Areas (includes break room and locker area): 1. Empty wastebaskets. Replace plastic trash can liners at least weekly. The Contractor shall also remove any items marked “TRASH”. 2. Dust mop or sweep hard surface floors with a yarn broom treated with polyethylene glycol or similar noninjurious material. 3. Vacuum carpeted areas and entry way rugs. 4. Spot clean carpets and walk-off mats to remove daily stains. 5. Dust visible surfaces including windowsills, furniture, fixtures, counters and equipment to a height of six feet with a treated cloth/duster, which will pick up dust particles and eliminate static electricity. 6. Remove fingermarks and smudges from surfaces, counters, tabletops, glass, walls, doors and floors. 7. Clean, disinfect and polish sinks (wash basins) and drinking fountains. All mineral and calcium deposits must be removed. 8. Clean, disinfect and deodorize counter and table surfaces in break room and public counter in the lobby. Laboratory Suites: 1. Dust mop/sweep hard surface floors with a yarn broom treated with polyethylene glycol or similar noninjurious material. 2. Empty non-biohazard wastebaskets. Replace liners with new liners daily. 3. Clean and disinfect sinks (wash basin).