Specifications include, but are not limited to: Designing surrounding areas to include parking lots, street/traffic access, trails, fencing, lighting and landscaping will be the responsibility of the design firm. Additionally, the selected firm will facilitate the selection of furnishings. The selected A/E will be required to perform all calculations, studies, research and code analysis to ensure full compliance with state laws governing the practice of architecture and engineering. The A/E will produce new drawings and specifications and a statement of probable construction cost (SPCC) with updates at each phase of design. All work must be in full compliance with the most recent MSB Facility Design Criteria Manual, current International Building Codes, as well as all other pertinent federal, state and local codes. The A/E will advise Borough Staff on facility systems and design to ensure the best systems and design are selected that suit MSB requirements. The A/E is also responsible for selecting materials and systems suitable for local conditions and ease of maintenance. The A/E will interact with the Design Advisory Committee to develop a design that meets requirements and will document and distribute meeting minutes for approval after each meeting. Meetings will be held at times and locations that are convenient for maximum attendance. The A/E is responsible for all aspects of design including, but not limited to architectural, civil, site survey, geotechnical (to include topographic survey and mapping to one-foot contour intervals in the area of the new facility, test pits, borings, sampling, testing and evaluation and other pertinent information to be compiled into a formal geotechnical report), landscape design, access routes, signage, structural, mechanical, electrical, food service, acoustical, permitting, all utility planning, cost estimates and coordination with utility installation/connection. Services will include project drawings to include construction and record drawings, O & M manuals, on-site representation/inspections, construction administration and warranty period support.