Specifications include, but are not limited to:SPECIFICATION #292-4K-AIP 4,000 Gallon Runway Deicer Unit GENERAL SPECIFICATION: It is the purpose of this specification to describe a new, and of the latest manufacturer's current model and design 4,000 gallon capacity liquid deicer unit mounted on a 77,200 GVW 6x4 cab and chassis truck. The truck shall require a central FEPTO hydraulic system to power the deicer functions with controls mounted inside the cab. Materials: Materials shall conform to the specifications listed herein. When not specifically listed, materials shall be of the best quality for this purpose in commercial practice. Materials shall be free from defects and imperfections that might affect the serviceability of the finished product. Design: The design of the equipment shall be in accordance with the best engineering practices. The equipment design and accessory installation shall be free of hazardous protrusions, sharp edges, cracks, or other elements that might cause injury to personnel or equipment. All oil, hydraulic, and air tubing lines and electrical wiring shall be located in protective positions properly attached to the frame or body structure and shall have protective looms or grommets at each point where they pass through structural members, except where a through-frame connector is necessary. The unit provided is required to meet all current federal and state regulations such as, but not limited to FAA, FMVSS, and CFR. When loaded in accordance with the requirements of page 3, of this specification, the unit must not exceed the manufacturer’s weight rating of the vehicle at any tire or axle position. The unit, including all necessary equipment, shall be furnished complete and ready to use. All items not specifically mentioned that are required for a complete unit shall be furnished. Any items appearing in the manufacturer’s regular published specifications are assumed to be included in the bidder’s proposal.
