Specifications include, but are not limited to: The Contractor will be responsible for providing services necessary for the successful operation of the Solid Waste Landfill, the C&D cells, the asbestos cell and other routine maintenance as required by Solid Waste Division (SWD) management. The main focus of the work will be the maintenance of the working faces at the MSW and C&D cells, both there sizes and cover vary dramatically. The MSW is a smaller working face that requires daily cover, while the C&D cell’s face is typically bigger and requires cover at least monthly. Per State of Alaska Department of Environmental Conservation (SOA ADEC) Permit-Para 12. C&D operations Typical daily tasks include: i. Spreading and compacting waste ii. Excavating, hauling, and placing cover material iii. Constructing and maintaining landfill access roads iv. Snow plowing and sanding v. Spreading, compacting and covering the C&D cells vi. Spreading and covering the asbestos cell (by appointment and immediately) vii. Picking up all windblown litter (may be on or near the landfill) viii. Maintain old and existing cells as required. ix. Perform grounds maintenance with equipment as required.