This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Note: This acquisition is subject to the availability of funds.
INTRODUCTION: The AFCEC has a requirement to upgrade a 2024 Ford F-550 Dual Rear Wheel cab and chassis truck with a new steel utility truck bed. The Government is seeking a contractor to provide and install a new steel utility truck bed on the vehicle as specified below. The AQD is issuing this competitive RFQ as 100% set aside for small business.
OVERVIEW OF THE REQUIREMENT: This acquisition is to provide and install the exact required commercial end item of supply with the required specifications below on or before December 1, 2025. The Government intends to drop-off and pick-up the vehicle at the location of installation given the driving distance does not exceed 100 miles from the address below:
Joint Base Elmendorf-Richardson
7212 12th Street
JBER, Alaska 99506
Vehicle Specifications:
VIN: 1FD0W5HT4PED66045
Model Year: 2024
Build Date: August 2023
Cab to Axle: 60¿
Wheelbase: 179.8¿
Frame Rail Width 34.2¿
Service Truck Bed Specifications and Requirements: The service truck bed to be procured and installed must meet or exceed the following specifications:
Dimensions & Structural Requirements:
Length: 9 Feet 4 Inches
Width: Minimum 94 Inches
Frame Material: Structural skirted steel
Headache Rack: Notched design with steel tube and window bars
Flooring: 1/8 Inch steel, tread plate or diamond plate
Frame Rails: 4 Inch structural channel steel
Tailgate: Fold-down design with latch
Spare Tire Storage
4 Storage Compartments with one being large enough for a drawer toolbox.
Fuel Access: Dual tank Angled fuel fillers
DEF Access: External Fill
Towing & Electrical:
Rear Bumper: Rated for 18,000+ lbs. with 2 ½ Inch receiver hitch
Gooseneck Hitch: 30,000 lbs.-rated 2 5/16 Inch ball
Wiring:
7-pin plug in gooseneck well
7-pin female receiver plug with adapter
Lighting & Accessories:
All lighting must meet DOT standards
Integrated license plate mount
Mudflap brackets included
Ability to mount a Transfer/Auxiliary fuel tank.
Additional Modifications to Vehicle:
HD Front ¿Moose Guard¿ Bumper with 25,000 lbs. Winch
2.5 Inch Lift Kit
35x12.50 Offroad capable tires
Emergency light Package
BK Base for mobile radio
Installation Requirements: The selected vendor will be responsible for the full installation of the service bed onto the identified vehicle. Installation must comply with all applicable safety standards, and all wiring, fuel access points, and hitch components must be fully functional and tested prior to delivery.
