Specifications include, but are not limited to: Unit to be Hunter TCX645HD or equivalent
Unit must be able to safely remove and install tires up to 90.5” in diameter with a max
width of 42” and max weight of 3500 lbs.
Max. Height of the machine, 61 in. with head fully raised
Spindle head must raise and lower into position
Must have twin rollers to loosen beads and dismount
Hyd. Powered carriage to locate wheel into place
Pump motor min of 2 hp.
Gearbox motor (two speed) min of 2 hp. With low speed min. cap of 4,800 ft. lbs. of
torque and high speed with min. torque of 3,300 ft. lbs.
Min. speed on high 10 rpm and on low at 5 rpm