Specifications include, but are not limited to: 1 Supply three (3) non-clog submersible pumps, controls and associated equipment capable of handling raw, unscreened sewage meeting the following performance requirements for the Lake Forrest Lift Station: (a). Design conditions (1 pump running): 1380 gpm @ 50ft. TDH @ 60Hz (b). Shut off Head: 76ft. (minimum) (c). Minimum Motor HP: 28 (d). Min. Pump Efficiency: 74% (e). Maximum Motor RPM: 1200 (f). Voltage: 460 Volt, 3 Phase, 60 Hertz 2 Manufacturers: Existing ABS six (6) inch pump bases and guide rails to remain. Pumps must conform and fit on the existing bases. Subject to compliance with requirements, provide products by one of the following: (a). ABS (b). Flygt C Series (c). or Approved Equal 3 Each motor shall be supplied with 49 feet of properly sized electric submersible cable sized in accordance with NEC & CSA standards.