Specifications include, but are not limited to: • Sign Faces: To be pan-formed .118” Makrolon - SL SGC-100 Lexan. • Sign cabinet size shall be 5’-0”H x 10’ -0”L installed in existing masonry frame using “L” brackets. • Cabinet shall be designed to bolt into brickwork supplied by the owner. • Sign cabinet shall be doubled sided and Pan Faced. • Graphics will be applied to second (inside) surface. • Sign cabinet shall be Heli-arc welded at mitered corners. • Sign cabinet shall be 9” Alcoa Extrude Aluminum. • Sign cabinet shall be finished with a powder coated Durethane II graffiti resistant paint. • High pigment translucent colors to be achieved with 3M’s high performance pressure sensitive vinyl. • Marquee area to be covered by a hinged Makrolon - SL SGC-100 Lexan cover equipped with props that automatically hold the cover up and will be equipped with three (3), ¼ turn locks. • Marquee area to be vertically planked. • Tracking for lettering will be riveted to the sign face every 4”. • The message center shall have three (3) lines, 8” each. • 501, 8” self-spacing letters shall be provided with the sign. • An additional thirty (30) letters of the owner’s choice will be available at no charge within the first six (6) months after delivery of the sign by manufacturer and/or contractor. • Letters to be double silk-screened on 1/16” DR resin. • Letter storage case shall be included. • Letters shall be available in red, blue, brown, or black. • Must have vandal cover. • Sign will be U. L. approved and Sign shall have a minimum wind load of 140 mph. • Illumination: High output, instant start fluorescent tubes with electronic ballasts. • Vendor shall be responsible for electrical rough-in. Owner will provide power source at a later date. • Clean-up: Vendor shall be responsible for the removal of all trash from site. • Frame and header color shall be chosen by owner. • The sign header area format shall be three (3) lines (50/30/20).