Specifications include, but are not limited to: 1.) MATERIAL AND LABOR TO RE PLASTER POOL AS FOLLOWS # Drain pool # Chip and remove plaster around existing fittings, main drains, lights, tile, etc. # Chip and remove any hollows in old plaster finish as necessary to achieve proper bonding of new plaster. # Install new 2”x6” bullnose step tile at step edge. # acid wash pool to remove all remaining dust/debris # apply ‘scratch coat’ bonding agent # inspect all main drains and address as needed # re-install all new return fittings and main drain grates assuring a smooth tie in. # apply a 3/8” thick Krystal Krete ‘Blue Quartz’ plaster troweled to a smooth finish. # Assist with filling/balancing of pool…chemicals/water for filling to be provided by others.