Specifications include, but are not limited to: 1.Year & Model –New & unused 2020 or newer year model truck chassiswith factory warranty. Minimum GVWR of 35,000 lbs.4x2 axle configuration.2.Dimensions --Wheel Base: 254”, CA: 186.9”, Axle to Frame: 61”3.Engine –Cummins B6.7 250, EPA 2017, 250HP @ 2400 RPM, 660 IB-FT torque @ 1600 RPM, 2600 RPM Governed speed, 250 peak HP (Max)4.Transmission –Allison 3000 RDS 5th generation controls, close ratio, 5-speed with overdrive, with PTO provision, less retarder, includes oil level sensor, with 80,000-ib GVW and GCW max, on/off highway5.Calc. Start / Grade Ability--20.85% / 2.06 @ 55 MPH6.Calc. geared speed--78.4 MPH7.Front Tires –(2) 11R22.5 Load Range G ecoplus HS3 (Continental), 495 rev/mile, 75 MPH, All-position; or Equal8.Rear Tires --(4) 11R22.5 Load Range G HDL2 (Continental) 493 rev/mile, 75MPH, Drive; or Equal9.Rear Axle –Single reduction, 23,000-IB capacity, gear ratio: 5.3810.Rear Suspension –23,500 lb. capacity, vari-rate springs with 4500 lb. capacity auxiliary rubber springs