Specifications include, but are not limited to: MOWER, TRACTOR, GREENS with attachments for golf course: Qty.-1 -16 hp or more at 3600 rpm.. -Gasoline engine/ unleaded gasoline. -Traction drive: Hydraulic piston pump, closed loop system, 2wd parallel hydrostatic. -implement drive: single gear pump, mono valve block, series reel drive to 3 motors. -Steering: power steering. Adjustable steering wheel tilt -Control/gauges: Raise/lower-mow lever. Functional control lever. Foot operated traction drive and brakes. Hour meter. hand operated throttle and choke. Mechanical engine speed control. -width of cut: 59"(150 cm) -Reel speed: Approximately 1975 rpm at 2850 engine rpm -Backlapping: standard equipment -Cutting unit suspension: Cutting units are completely free-floating, each attaching to the tractor by direct pull links and lifted by a centered lift arm. Baskets are supported by carrier frames that are ground following. Cutting unit floatation is unaffected by basket content. Interchangeable grass baskets. -Roll over protection system Attachments: Qty: 3/ 11-Blade DPA cutting units. -Height of cut: adjustable cutting height . Bench HOC range is 0.062-.297. With high HOC kit, range is .285-1". Effective HOC may vary depending on turf conditions and bedknife installed. -Bedknife: Replaceable single edged bedknife. Qty. 1 **LED Light kit Qty. 1 **Narrow Wiehle Rollers(Set of 3)