Specifications include, but are not limited to: LOADER, BACKHOE, NEW LATEST MODEL, FOUR WHEEL DRIVE * 4 EACH * The tractor loader shall be of a unitized integral frame design; the manufacturer's latest design currently produced model only. The unit shall have a diesel engine producing not less than 108 SAE net flywheel horsepower. Hydraulic System: 41 gallons per minute. Variable flow, axial piston pump. The transmission shall be a full power shift with torque converter, for 4 forward and 2 reverse speeds minimum. A transmission disconnect or neutralizer pedal shall be furnished. The front end loader shall have a full height lift capacity of no less than 6 , 087 lbs. and a breakout force of a minimum of 9 ,813 lbs. Backhoe to be equipped with a hydraulic quick coupler (tool carrier). The bucket shall be Multi-Purpose type with at least 1. 20 CU. yards. The loader shall incorporate automatic self leveling, float and return to dig, extended bolt-on cutting edge and a set of 48” pallet forks to fit the coupler. The backhoe shall have a n extendable dipper stick with a loading height of at least 1 2' 10" retracted and 14' 10" extended. A digging depth of at least 15' 6 " retracted and 19' 6 " extended. The arm digging force shall be 9,850 lbs. or greater. The backhoe shall be equipped with reversible stabilizer pads, rubber on one side and dirt type on the other side. The buckets shall consist of one (1) 24" digging bucket with teeth and one 48 " tilting ditching bucket with hydraulic quick coupler with hydraulic thumb. The Backhoe shall have an auxiliary hydraulic circuit to operate the hydraulic tilting bucket, with manual 3 way shut off valve to swap between tilt bucket and hydraulic thumb. The unit shall have a control system that will allow operator to choose between SAE and ISO Control pattern. The unit shall include the following miscellaneous equipment: ROPS cab with two doors, heater and a/c; front and rear work lights; LED hazard lights; LED turn signals; SMV emblem; LED rotating beacon light; tool box; engine/transmission oil monitoring; engine temperature; hydraulic oil temperature; tachometer; hour meter; fuel gauge; backup alarm; rear fenders; vandalism protection with locks for hydraulic tank, engine access doors, and fuel tank, skid plates, front bumper with grill (coolers protection). All service compartments must be lockable. 19.5L x 24 or 21L x 24 - 10 ply drive tires; 12.5/80 18, or 14 x 17.5 10 ply traction type front tires.