Specifications include, but are not limited to: Shovels, Power; and Excavating Machines ENGINE : Diesel 167 net h p. or greater. HYDRAULIC SYSTEM : Variable displacement axial-piston type with at least 60 gallon per minute flow. Unit to have auxiliary hydraulics with 2 pump flow, case drain and hydraulics plumbed to the end of boom. Dual auxiliary hydraulics, one for thumb and one for tilt bucket. Hydraulic system and pump flow pressure to be adjustable in cab. DRIVE : Drive system shall be fully hydraulic with at least 47,619 lbs. of drawbar pull. BRAKES : Hydraulic wet disc type with parking brake and/or mechanical disc parking brake. STEERING : Steering controls shall be hand or foot operated. UNDERCARRIAGE : Track length of at least 15' 2" and track gauge of 8' 6" with 31" triple bar grousers. SWING : Swing shall be hydrostatic planetary reduction type. BOOM : Boom arm shall be at least 9' 8" and not over 11'. Shall have a reach at ground of at least 33' 1" digging depth of at least 22' 5" and loading height of at least 22' 1". Breakout digging force of stick, 27,350 lbs. to include a hydraulic thumb. CAPACITY : Shall have a lifting capacity of at least 25,700 lbs @ 15' at ground line over the front and at least 17,260 lbs. @ 15' at ground line over the side. CAB : Fully enclosed with safety glass; heater/defroster, air conditioner; windshield wipers; monitoring for engine oil pressure; water temperature; hydraulic temperature; hour meter; all controls for operation of machine; LED rotating beacon; complete LED light package including additional front and rear work lights; front glass protector; air ride seat; all service compartments must be lockable. BUCKETS : One heavy duty 36" digging bucket with bucket teeth at least one cubic yard capacity. Breakout force of digging bucket, 33,000 lbs., with quick coupler, one hydraulic tilt 60” ditching bucket. CONTROL SYSTEM: Shall have a control system that will allow operator to choose between SAE and ISO Control pattern. OPERATING WEIGHT : Minimum of 55,600 lbs Vendor to furnish two (2) sets of parts books, service manuals, technical manuals and operators’ manuals with each unit. Must have parts and service within 75 miles of delivery point. Must have three (3) sets of keys.